Make frnds scare for VIRUS

Open notepad and type this:

lol=msgbox ("Warning a virus has been detected on your PC. Press YES to format your hard disk now or press NO to format your hard disk after system reboot",20,"Warning")

Then save it as Virus.VBS

and go to the folder that contains it and open it if a window pops out saying a virus has been detected it's working. Press yes or no to close the window and put it in the startup folder of the victim's account.
On startup the window should appear.
Note: This does not harm your computer as it does not contain virus.

The Yes and no button does not do anything except closing the window. And you can edit the virus in the sentence: Warning a virus has detected on your PC to any kind of virus eg.Trojan Horse like this lol=msgbox ("Warning a Trojan horse has been detected on your PC. Press YES to format your hard disk now or press NO to format format your hard disk after system reboot",20,"Warning")

Oh in between make sure your victim does not panic and really reformat his harddisk. hahaha

StarWars Movie in Command Prompt

Just type in

telnet towel.blinkenlights.nl

in the 'Run' command and watch the episode!

Password protected folders with & with out SOFTWARE

Folder lock with software
click here
http://www.esnips.com/doc/7f993235-e6dc-4ccc-b107-7ee46b69f793/pc-security(reg)

now just download it and make it full version by the side txt files key....
.................................................
Folder lock without software

If you have a log in password for your account, this can be used to protect folders from other users. Your hard drive must be f

ormatted using NTFS (which it probably is unless you're dual booting with another operating system). Here's what to do...


Right-click the folder that you want to make private and choose "Properties"

(or Alt+Double-click). Go to the "Sharing" tab and check the "Make this folder private" box.

Click Apply . If you do not have a password on your account, a box will pop up asking if you want to assign a password. This must be done if you want to make the folder private, so click Yes . You will need to use your password to log on to your computer from then on.
Type in a password then confirm it. Click the "Create Password" button then close the Password window.
Click OK in the Properties dialog box.
Now anyone else logged on to your computer can't access that file without knowing your password.

Create Your Own Logon Message

1 Click start
click run
type regedit,
then click ok!

2 In The registry editor, drill down to the following key:
hklm\software\Microsoft\Windows NT\Current version\Winlogon.

3 Right click LegalNoticeCaption,
click modify,
Type: THIS IS NEXT TRICK,and then click ok!

4 Right click legalNoticeText,
click modify, and then Close your message!

5 Restart Your Computer.

6 The message will appear every time you logon!

Chat With Command Prompt

                                                     If you want personal chat with a friend

you don't need to download any yahoo messenger
All you need is your friends IP address and Command Prompt.

Firstly, open Notepad and enter:

@echo off

:A

Cls

echo MESSENGER

set /p n=User:

set /p m=Message:

net send %n% %m%

Pause

Goto A

Now save this as "Messenger.bat". Open the .bat file and in Command

Prompt you should see:

MESSENGER

User:

After "User" type the IP address of the computer you want to contact.

After this, you should see this:

Message:

Now type in the message you wish to send.Before you press "Enter" it should look like this:

MESSENGER

User:27.196.391.193

Message: Hi

Now all you need to do is press "Enter", and start chatting!

Create A Hidden User Account

This tweak allows an account that is normally displayed on the Welcome screen to be hidden from view. To log on using the account it's necessary to use the Log On To Windows dialog box similar to the one in Windows 2000. #[Start] [Run] [Regedit]#Registry Key:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsNT\CurrentVersion\Winlogon\SpecialAccounts\UserList#Modify/Create the Value Data Type(s) and Value Name(s) as detailed below.#Data Type: REG_DWORD [Dword Value] // Value Name: Type Name of Account to be Hidden#Setting for Value Data: [0 = Account is Hidden / 1 = Enabled]#Exit Registry and Reboot...

While the account is hidden on the Welcome screen, note that the account profile will be visible in C:\Documents and Settings or wherever user profiles are stored as well as in Local Users and Groups

Hidden Programs In Windows XP !

Is it strange to hear , but true that some good programs are hidden in Windows XP !!!


Programs :

1. Private Character Editor :

Used for editing fonts,etc.
** start>>Run
** Now, type eudcedit

2. Dr. Watson :

This an inbuilt windows repairing software !
** start>>Run
** Now, type drwtsn32

3. Media Player 5.1 :

Even if you upgrade your Media Player, you can still access your old player in case the new one fails !!!
** start>>Run
** Now, type mplay32

4. iExpress :

Used to create SetupsYou can create your own installers !
** start>>Run
** Now, type iexpress

How to "Delete administrator Password" without any software

Method 1

Boot up with DOS and delete the sam.exe and sam.log files from Windows\system32\config in your hard drive. Now when you boot up in NT the password on your built-in administrator account which will be blank (i.e No password). This solution works only if your hard drive is FAT kind.

Method 2
Step 1. Put your hard disk of your computer in any other pc .
Step 2. Boot that computer and use your hard disk as a secondary hard disk(D'nt boot as primary harddisk). 
Step 3. Then open that drive in which the victim’s window(or your window) is installed. 
Step 4. Go to location windows->system32->config 
Step 5. And delete SAM.exe and SAM.log
Step 6. Now remove hard disk and put in your computer.

Step 7. And boot your computer :-)

Rapidshare Download From Firefox

Many down loader who download file from rapidshare download  file using some download manager like Cryptload,Jdownloader etc.But there is Add on in Firefox which is more efficient that that type download manager.

Rapidshare AutoWait is a user script that can be loaded in the Firefox Greasemonkey extension. It give as much as facilities as given by those download manager .As well as It allows a user to open many Rapidshare links which get then downloaded sequentially without user interaction.

The script automatically do it’s work when it is open.and detect if a download is already in progress to loop or not and other paused  download..

This script also helps to resume download file after download progress is pause for long time.Which cannot perform by download manager.

AutoWait is a very recommended option  for users who download files regularly from Rapidshare.  It is possible that the script will also work in other web browsers that provide user script support such as Opera or Safari web browsers.

Unlimited Rapidshare Downloads

Its very easy to fool Rapid Share account server if your IP address is assigned by your ISP. Just follow these simple steps:

Clean up IE or netscape cookie( In this case the one that belong to rapidshare website)
On Command prompt
type —–> ipconfig /flushdns <—Enter
type —–> ipconfig /release <—Enter
type —–> ipconfig /renew <—Enter
type —–> exit <——–Enter
Or save these commands in a bat file and run it every time you need to fool Rapidshare server.Remember to clean up rapidshare cookie in your temp Internet files folder.
Now you should be ready to download as many files as you want from their server.

And there is this cool link: paste it in the browser and see
CODE :
http://www.google.com/search?lr=&as_qdr=all&q=+.rar+OR+.zip+OR+.pdf+OR+.exe+site%3Arapidshare.de

Make Any Folder As A Image Folder.

This tricks shows you how to setup any folder to display its contents as a image folder. In many cases, you save your images/photos in a folder different than "My Pictures" (under "My Documents"). Since this folder you choose is just like any other normal folders, its contents displayed as a listing of files. You can temporary change it by just right-click and select "View" >> "Thumbnails". But if you want to change the folder so that every time you come back, the folder itself, as well as all its sub-folders, display the contents as photo thumbnails.

Just follow the simple steps to make any folder as a image folder.

Step1: Right-click on the folder you choose and select "Properties".

Step2: Customize Tab >> Use this folder type as a template, select "Pictures (best for many files)".

Step3: Check on "Also apply this template to all subfolders" to apply the setting to subfolders as well.

Thats done…

Use God Mode In Windows 7

Windows 7 is now becoming popular among windows operating system  users.Windows 7 has cool hidden feature ,people calls it godmode in windows 7.GodMode is a folder that brings together a long list of customization settings allowing you to change all your settings from one place.This is very good as you can now change all your windows settings from one single place.

Just follow the simple steps to create god mode folder:

Step 1: Create a new folder

Step 2: Rename the folder to GodMode.{ED7BA470-8E54-465E-825C-99712043E01C}

You can change word GodMode to any other word you like your name or your friends name

Step 3: The folder icon will change ,then  double click it to show the GodMode windows options.